12
Software Installation
Our slice software is modified form Cura open source slice software, in order to better match
with our company's machines for printing and meet the needs of our customers.
Tips：You can use a card reader to copy the data in the TF card to the computer for storage.
The software installation steps are as follows：
Open the TF card of the machine to select the path \ Software and Software Drivers folder \ ELEGOO Software folder \
Double-click the ELEGOO-Cura application to install it.
Follow the prompts in the installation process to the next step.
Finally, select the corresponding model of our company as shown below to complete the settings.
To Next Page