Elegoo Neptune 3 Plus - Machine Specifications; Print Specifications; Temperature Specifications; Software & Connectivity

1
Machine Parameters
Print Parameters
Print Principle: FDM（Fused Deposition Modeling）
Build Size: 320X320X400(mm³)
Print Precision: ±0.1mm
Nozzle Diameter: 0.4mm
Print Speed: 30~180mm/s（60mm/s is recommanded）
Temperature Parameters
Ambient Enviroment Temperature: 5°C~40°C
Maximum Temperature of Nozzl: 260°C
Maximum Temperature of Hotbed: 100°C
Software Parameters
Slicer Software: Cura
Input Format: STL、OBJ
Output Format: Gcode
Connection Type: TF Card、USB Wire
Power Supply Parameters
Power Input: 100-240V 50/60Hz
Power Output: 24V
Physical Parameters
Machine Size: 578*533*640mm
Net Weight: 14.2kg