Element P303BT - USB Interface; USB COM Port Emulation

Element P303BT User Guide I Page 11 of 53
Swiss_German
British
Danish
Novwegian
Spanish
2.2.5 USB Interface
When you connect cradle to the Host via a USB Cable, you can enable the USB HID-KB feature by scan ning the
barcode below. Then cradle’s transmission will be simulated as keyboard input. The Hostreceives keystrokes on the
virtual keyboard. It works on a Plug and Play basis and no driver is required.
USB-HID（default）
2.2.6 USB COM Port Emulation
When you connect cradle to the Host via a USB connection, the USB COM Port Emulation feature allows the Host to
receive data in the way as a serial port does. A driver is required for this feature, visit the official website
(www.elementpos.co) to download and install .