Element P303BT User Manual

Element P303BT User Guide I Page 5 of 53
2 Communication Interfaces
2.1 Bluetooth Scanner Setting
Press the scanner`s button for 3s ,then it is powered on.
2.1.1 Connect with Bluetooth Cradle
STEP1：Scan the barcode stuck at the bottom of the cradle, wait for connection.
2.1.2 Bluetooth Keyboard
STEP1:Scan the barcode below to start a new connection. The scanner will be discoverable in 120s.
Bluetooth keyboard
STEP2：Set your personal laptop or tablet so it searches for other Bluetooth devices.
STEP3：Select the scanner name (named after 12 SN characters) on your device, the scanner will work as a keyboard.
2.1.3 Bluetooth serial port
STEP1:Scan the barcode below to start a new connection. The scanner will be discoverable in 120s.
Bluetooth serial port
STEP2：Set your personal laptop or tablet so it searches for other Bluetooth devices.
STEP3：Select the scanner name (named after 12 SN characters) on your device, the scanner will work as a keyboard.
2.1.4 Country Keyboard Types
Keyboard layouts vary from country to country. The default setting is U.S. keyboard.
If your interface is Bluetooth Keyboard, scan the Keyboard Country barcode below to change this layout.

Element P303BT Specifications

General

Brand	Element
Model	P303BT
Category	Scanner
Language	English