Element P303BT - EAN-8

Element P303BT User Guide I Page 24 of 53
Programming command: Max: 020A0325 ; Min: 020A0210.
5.3 EAN-8
Enable/Disable EAN-8
Enable EAN-8 (Default)
Disable EAN-8
Transmit Check Digit
EAN-8 is 8 digits in length with the last one as its check digit used to verify the accuracy of the data.
Transmit EAN-8 Check Digit (Default)
Do Not Transmit EAN-8 Check Digit
Add-On Code
An EAN-8 barcode can be augmented with a two-digit or five-digit add-on code to form a new one. In the examples
below, the part surrounded by blue dotted line is an EAN-8 barcode while the part circled by red dotted line is add-on
code.