Element P303BT - Symbologies; General Setting; Enable;Disable All Symbologies; Code 128

To Next Page

To Previous Page

Element P303BT User Guide I Page 23 of 53

5 Symbologies

5.1 General Setting

5.1.1 Enable/Disable All Symbologies

If the Disable All Symbologies feature is enabled, the engine will not be able to read any non-programming barcodes

except the programming barcodes.

Enable All Symbologies

Disable All Symbologies

5.2 Code 128

Enable/Disable Code 128

Enable Code 128 (Default)

Disable Code 128

Message Length

Message length can be set to the maximum value or minimum value. The value between the maximum and the

minimum is valid.

The maximum value and minimum value can be set using “Programming Command”. Please check the programming

command guide for the detail.

Code 128 max length command: 020A03. The parameter of this command can be set from min to 90.

Code 128 min length command: 020A02. The parameter of this command can be set from 0 to max.

Example: Set the Barcode Message length of the minimum value is 10; the maximum value is 25.