Element RW60 - Printing Media Specification; Continuous Thermal Paper Specification; Notices

RW60 User Manual
9
3.2 Printing Media Specification
3.2.1 Continuous Thermal Paper Specification
Paper Type : Specified Thermal Paper
Paper Width :
0
1
58


mm/
0
1
80


mm
Paper Outer Diameter : Max. 83 mm
Paper Thickness : 0.056 ～ 0.13mm
Paper Type
Manufacturer
FD210, PD150R, PD160R
OJI Paper CO.,LTD.
3.2.2 Notices

Please use the recommended thermal paper or same quality paper, otherwise it will
influence the printing quality and decrease the thermal printer head life.
 Do not stick the paper on the roll paper mandrill.
 If the thermal paper is polluted by chemical or oil, the thermal paper heat sensibility
decreases, which will influence the print quality.

Do not use finger nail or hard articles to touch the surface of thermal paper, otherwise
it will cause color fading.

When the environment temperature is higher than 70°C, the thermal paper color will
fade, so pay attention to the influence of temperature, humidity and sunlight.