Element RW60 - Troubles Occur During Printing

RW60 User Manual
23
6.3 Troubles Occur During Printing
Problem Description
Probable Reason
Solution
Coloured stripe in the
paper
Paper near end
Reload the paper roll
Blurred printing or spot
Incorrect roll paper loading
Check if the paper roll is loaded
Unqualified paper roll
Use recommended thermal paper
roll
Thermal head or print roller is
dirty
Clean the thermal head or print
roller
Low print density
Increase the print density level
Paper is not feeding
normally
Paper jam
Open the printer cover, check the
paper path and remove jammed
paper
Vertical print words are
missing
Thermal head or print roller is
dirty
Clean the thermal head or print
roller
Thermal head is damaged
Contact with your dealer for
assistance
Note: about the density setting, please refer to Utility Tool for POS Instruction at Chapter 8.