Element RW60 - LED Indicator and Beeper

RW60 User Manual
13
4.2 LED Indicator and Beeper
Function specification of indicator light and beeper.
Status LED
Description
Red (Flashing)
Wrong status (cutter jam, over temperature,
paper end and so on)
Purple (Constant Light)
Paper near end / printer is in normal status
Blue
(Constant Light)
Printer is busy
Green (Constant Light)
Printer is ready and in idle condition
Note: The printer uses a thermistor to detect the temperature of the print head. If the
temperature of print head is higher than 65° C, printer will send a warning. If the temperature of
print head is higher than 80° C, printer will stop working until the temperature is lower than 60°
C.
Description
L
ED
Beeper
The printer cover is
open
Red (Flashing)
“Beep, Beep—, Beep”
Paper Sufficient
Green
Silent
No Paper
Red (Flashing)
“Beep Beep Beep”.
Cutter Jam
Red (Flashing)
”Beep—, Beep—”