RW60 User Manual
Note: When DIP setting is set in soft, the DIP switch in the bottom of printer is disable.
After setting the DIP successfully, you need to restart the printer to take effect.
● Printer hardware setting
1）Print Density: Light, Medium, Standard, Dark (default "standard" level)
The print density value varies according to the paper material and it can be adjusted to suit your
needs.
2）DIP Mode: 180/203DPI (default "203 DPI")
The printer supports both of these resolutions.
3
）
Language Mode:
Chinese, Japanese, Korean mode (default)
Multi-language mode
To Next Page
Loading...
