Elenos ET5000

128 Maintenance
Rack fan stopped • Fan is not properly con-
nect to the mains
• Circuit breaker is not
armed
• Fan fault
• Replace the cable or
connect it
• Arm circuit breaker
• Call the manufacturer
No communication with tele-
metria/PC
• Combiner address incor-
rect
• Connection cable not
suitable
• Parameters setting incor-
rect
• Connection cable fault or
interrupted
• Set the correct address
• Verify that the cable used
is that provided by Elenos
or an equivalent
• Check correct parameters
(please see User Manual)
• Connect or change cable