Elenos ET5000

85Use instructions
Exxxx ID xx
SMS String
+39xxxxxxxxxx
Command
No mains xx m
xxx Messaggio di segnalazione
FWD yyyyy W
REFL yyyyy W
UMB PWR yyyyy W
TEMPMAX yyyyy F/C DUMMY LOAD
TEMPENV yyyyy F/C
Exc. x
Exxxx ID xx
SMS String
+39xxxxxxxxxx
RedPwr
No mains xx m
xxx Messaggio di segnalazione
FWD yyyyy W
REFL yyyyy W
UMB PWR yyyyy W
TEMPMAX yyyyy F/C DUMMY LOAD
TEMPENV yyyyy F/C
Exc. x
Exxxx ID xx
SMS String
+39xxxxxxxxxx
Exc.Exchange
No mains xx m
xxx Messaggio di segnalazione
FWD yyyyy W
REFL yyyyy W
UMB PWR yyyyy W
TEMPMAX yyyyy F/C DUMMY LOAD
TEMPENV yyyyy F/C
Exc. x
Where :
Exxxx ID xx is the description of the apparatus with indication of the ID number
SMS String is a customizable string of 10 characters
+39xxxxxxxxxx is the telephone number of origin of the last command
STBY indicates that the machine is in Standby (Off)
-3dB Alarm indicates that the machine is working below the-3dB
Status is the response to an SMS status command
Command is the confirmation to a command
RedPwr indicates that the machine is working in power limitation due to the UPS
Exc.Exchange indicates that there was an exchange between the exciters (Dual Drivers)
No mains xx m indicates that the machine has been off for the indicated time (in minutes)
xxx Messaggio di segnalazione indicates a cause of arrest or a major signaling
FWD yyyyy W indicates the forward power
REFL yyyyy W indicates the reflected power
UMB PWR yyyyy W indicates the power imbalance
TEMPMAX yyyyy F/C DUMMY LOAD indicates the temperature of the load
TEMPENV yyyyy F/C indicates the environment temperature
Exc. x indicates the exciters state (EXC.1, EXC.2, EXC.FAULT)
Please note: The functionality of the SMS reception is interrupted for an hour, if they are sent by
the system more than 5 messages over 5 min.