Eletta S2 User Manual

5041D2E18
9
5041A2E4
10
contacts (micro switches), which are considered “passive
components” (simple apparatus) and are therefore possible to
use in an intrinsically safe circuit where you feed the micro
switch contacts through an approved pulse isolator (not in-
cluded).
Explosion
Proof: The Flow Monitor itself is not approved as a complete instru-
ment according to EU Hazardous Area EX-regulations.
CE-
approvals: The Eletta Flow Monitors conforms with the EU directive for
low voltage no: 72/23/EEC ( EN 60 204-1, Part 1.) We refer to
the certificates issued, which will be sent to you upon request.
They are also available at www.eletta.com.
PED-
Directive: Complies with applicable parts in Pressure Equipment
Directive 97/23/EC Module A1. Eletta approved by notified
body Det Norske Veritas with approval number: 0409.
The certificates issued, which will be sent to you upon request
or they can also be found to download on www.eletta.com.
Approvals: The micro switches, cables and terminal blocks are approved
according to CSA.
1
5041A2E4
10
contacts (micro switches), which are considered “passive
components” (simple apparatus) and are therefore possible to
use in an intrinsically safe circuit where you feed the micro
switch contacts through an approved pulse isolator (not in-
cluded).
Explosion
Proof: The Flow Monitor itself is not approved as a complete instru-
ment according to EU Hazardous Area EX-regulations.
CE-
approvals: The Eletta Flow Monitors conforms with the EU directive for
low voltage no: 72/23/EEC ( EN 60 204-1, Part 1.) We refer to
the certificates issued, which will be sent to you upon request.
They are also available at www.eletta.com.
PED-
Directive: Complies with applicable parts in Pressure Equipment
Directive 97/23/EC Module A1. Eletta approved by notified
body Det Norske Veritas with approval number: 0409.
The certificates issued, which will be sent to you upon request
or they can also be found to download on www.eletta.com.
Approvals: The micro switches, cables and terminal blocks are approved
according to CSA.
1
5041A2E4
10
contacts (micro switches), which are considered “passive
components” (simple apparatus) and are therefore possible to
use in an intrinsically safe circuit where you feed the micro
switch contacts through an approved pulse isolator (not in-
cluded).
Explosion
Proof: The Flow Monitor itself is not approved as a complete instru-
ment according to EU Hazardous Area EX-regulations.
CE-
approvals: The Eletta Flow Monitors conforms with the EU directive for
low voltage no: 72/23/EEC ( EN 60 204-1, Part 1.) We refer to
the certificates issued, which will be sent to you upon request.
They are also available at www.eletta.com.
PED-
Directive: Complies with applicable parts in Pressure Equipment
Directive 97/23/EC Module A1. Eletta approved by notified
body Det Norske Veritas with approval number: 0409.
The certificates issued, which will be sent to you upon request
or they can also be found to download on www.eletta.com.
Approvals: The micro switches, cables and terminal blocks are approved
according to CSA.
1
Complies with applicable parts in Pressure Equipment Directive
97/23/EC. Conformity assessment has been performed accor-
ding to module A. Internal production control combined with
module A1. Internal manufacturing checks with monitoring
of the nal assessment, for category 2. Performed by Inspecta
AB, Notied body No. 0409. PED Declaration of conformity
will be sent to you upon request and are also available on
www.eletta.com.
1

Eletta S2 Specifications

General

Brand	Eletta
Model	S2
Category	Measuring Instruments
Language	English