elmeg IP630 - Function Key Options

elmeg IP630 / en / elmeg IP630 / web_configurator.fm / 8/24/16
Template bintec-elmeg, Version 1, 01.07.2014
37
elmeg IP630
bintec elmeg Configuring other settings with the Web configurator
Possible functions:
¤ Set
No function No function assigned
Line Assigns a specific connection (line) to the function key. The key is used to initiate
or accept a call on this connection. The key flashes if a call comes in and lights up
if the line is busy.
¤ Select the desired connection
Quick Dial Assigns a number to the function key.
¤ Select connection required enter Phone number enter name for the
function key
BLF The telephone is connected to a PABX which supports this function and the
number is assigned to a group.
A function key that is configured as BLF (Busy Lamp Field) indicates the status of
a shared line. It will be configured on all extensions of the group. The keys will
flash on all extensions if a call comes in and light up if the line on any extension
is busy.
¤ Select connection required enter Phone number enter name for the
function key
Accept incoming calls: Enter Call Pickup Code
SIP URI Assigns an SIP URI to the function key.
¤ Enter SIP URI (e. g. sip:Susan.Brown@211.122.10.15) enter name for the
function key