45
➌ -5 ABOUT EIT(ELMO INTERACTIVE TOOLBOX)
The PX-10E/30E is compatible with the ELMO Interactive Toolbox (EIT) application software.
By installing EIT into your PC, you can control a large monitor or tablet PC or annotate on the
image using the touchscreen.
The following features are available by connecting a PC with EIT installed to the PX-10E/30E with
the USB cable.
①Enlarge: You can control the PX-10E/30E or enlarge the PC screen.
②Annotate: You can draw directly on the camera image or on still image or videos in the PC
without capturing them.
③Save / playback: You can play the material saved in any save destination.
④Useful functions: sticky notes / trimming / stamps / time-lapse recording
⑤Various tools: various operation modes / compare picture / mask
※If EIT is already installed in your PC, you need to update it.
For details on the EIT and how to download the instruction manual of the EIT, visit to the Elmo
official website or contact the dealer from whom you have purchased this product or our
branch/office near your location.
https://www.elmousa.com/downloads/ https://elmoeurope.com/download/
➌ -6 ABOUT SECURITY SLOT
A security slot is provided in the side of the PX-10E/30E. You can connect a security wire to the
slot to prevent from theft. Use this feature when you leave the PX-10E/30E in your classroom.
For details of the location of the security slot, refer to “◆PART NAMES” (⇒P.12).
➌ -7 USING AUTO LOCK
By setting the “Auto lock” in the System Setting menu to ON, you can disable buttons on the
operating panel or the LCD touchscreen. Using this feature, you can prevent the miss-operation of
the operating panel when touching the object on the stage (e.g. writing on the whiteboard sheet)
during the presentation. (⇒P.29)
<How to set Auto lock>
1. Press the Settings button [ ] on the operating panel. Select “Auto lock” in the System
Setting menu and set to ON.
2. The Auto lock will be activated if no operation of buttons on the operating panel or the LCD
touchscreen continues for 30 seconds.
※A lock icon will be displayed if buttons on the operating panel are pressed or the LCD
touchscreen is touched during Auto lock mode.
※The AF button, Power button and Zoom jog dial can be operated even in Auto lock mode.
<How to temporarily cancel Auto lock>
1. Touch and hold the lock icon displayed on the LCD touchscreen.
2. Slide the finger up on the LCD touchscreen.
3. The Auto lock will be temporarily cancelled.
※The Auto lock will be activated again if no operation of buttons on the operating panel or the LCD
touchscreen continues for 30 seconds.
<How to cancel Auto lock>
1. Temporarily cancel the Auto lock.
2. Press the Settings button [ ] on the operating panel. Select “Auto lock” in the System Setting
menu and set to OFF.
To Next Page
Loading...
