Elmo QBiC MS-1 - Transferring Files to Computer; Mass Storage Transfer; microSD Card Transfer

32
TRANSFERRING THE FILES TO YOUR COMPUTER
The files recorded by the camera can be transferred to your computer using the Mass
Storage feature or the microSD.
MASS STORAGE
1. Open the Interface Terminal Cover.
2. Connect the camera to your computer using the supplied USB cable.
3. Press the Power Switch of the camera for longer than 1 second to turn on the camera.
The computer recognizes the camera as a removable disk after the camera is started.
* Remove the USB cable after the camera is turned off.
MICRO SD CARD
1. Open the Interface Terminal Cover.
2. Remove the microSD card. Then, insert it into the card slot of your computer.
(If your computer does not have the card slot for the microSD card, use a commercially
available card reader.)