Normal Maintenance
Clean the camera surface gently with a dry, soft cloth.
Maintenance after the camera is exposed to water
Wipe off the water droplets with a soft, dry cloth, and then dry the camera completely at
a well-ventilated location in the shade.
How to remove heavy dirt
Wipe off the dirt with a soft, moistened cloth, and then wipe off the water droplets with a
soft, dry cloth, and dry the camera completely at a well-ventilated location in the shade.
* Leaving droplets or foreign objects may deteriorate the waterproof performance and
damage the camera.
Do not open or close the cover until all the foreign objects such as sand and dust are
completely removed.
Otherwise, foreign objects or water may get inside the camera.
* Do not use soap, neutral detergents, or chemicals to rinse the camera. It may
deteriorate the waterproof performance.
The firmware of the camera will be updated from time to time to improve their performance
and functionality. By updating the firmware, you will be able to use new functions.
* Be sure to save the important files before starting the update.
1. Download the update file (ms1fw_xx.xx.xxxx.bin) from the QBiC MS-1 official website:
http://www.elmoqbic.com/ms1/ to your computer.
2. Save the downloaded file to the microSD card.
3. Turn off the camera and insert the microSD card.
4. Turn on the camera. The update will start automatically.
* The camera needs to have enough battery charge to update its firmware.
To Next Page
Loading...
