35
smart device. Then restart the application.
* The communication range differs depending on the using environment.
In case of communication problem, shorten the distance between the camera and
your smart device or retry in the location where there are no obstacles.
1. Open the Interface Terminal Cover.
2. Connect the camera to a TV or projector using a commercially available HDMI cable.
(The HDMI cable needs to have micro D connector.)
3. Press the Power Switch of the camera for longer than 1 second to turn on the camera.
The live view appears on the TV monitor or screen of the projector after the camera is
started.
* The resolution of the live view changes according to the setting of the camera.
To Next Page
Loading...
