34
Switch to activate the WiFi.
[Operation of iOS device]
3. From the home screen of your iOS device, tap “Setting” →”Wi-Fi”.
4. Set the “Wi-Fi” in the “Wi-Fi” setting window to “ON”.
5. Select “QBiCMSxxxxxxx (xxxxxxx is a serial number of the camera)” from the
list in “Select the network…..” and tap it.
6. Enter “1234567890” to the password window.
7. Tap the “Connect” button.
8. ✓ mark will be displayed at the left of “QBiCMSxxxxxxx”.
9. Close the “WiFi” setting window to return to the home screen.
[Operation of Android device]
3. From the home screen of your Android device, tap “Setting”→”Wi-Fi”.
4. Set the “Wi-Fi” in the “Wi-Fi” setting window to “ON”.
5. Select “QBiCMSxxxxxxx from the list displayed and tap it.
6. Enter “1234567890” to the password window.
7. Tap the “Connect” button.
8. You can see that “QBiCMSxxxxxxx” is now connected.
9. Close the “WiFi” setting window to return to the home screen.
* The application may not work properly when more than 2 smart devices are
connected to 1 camera.
* SSID and Key can be changed. Refer to the following page for details.
P. 43 Settings
* Actual setting procedure for iOS device and Android device may be different
depending on its version. Refer to the instruction manual or website of your device
for further details.
STARTING QBIC APP
1. From the home screen of your smart device, start QBiC APP.
2. The live view of the camera will be displayed after the live button is tapped.
* The live viewing may be frame-by-frame when recording movies. The live view
cannot be displayed when the resolution is set to High Speed.
* If a communication error message is displayed on the application, check the
settings of the camera and your smart device and restart the camera and your
To Next Page
Loading...
