4
Press remote button 2
To decrease <the sensitivity level by (1) one step each time, the LCD
transmitter will respond with sounds and the corresponding number will
appear at the bottom of the screen (min level is 1)
5
Aſter setting the sensitivity of shock sensor, continue
setting the Tilt sensor.
Press and release the button 4
on the LCD remote.
The siren will respond with 5 sounds on the
LCD screen, the tilt icon and number 5 will
appear at the top of the screen (factory
setting level number 5).
There are five levels. One siren beep means the first
level the lowest sensitivity (tilt 45 degrees), five siren
beeps means the fiſth level - the highest sensitivity (tilt
10 degrees).
12
To Next Page
Loading...