Upgrade your security system for even more security
2.42 Optional Accessories
MD-4 Perimeter sensor
MD-4 Perimeter sensor Safety with perimeter protection –
Detects movement around the motorcycle designed with 3
warning levels.
Installation MD-Perimeter sensor
It is recommended to place the sensor under the seat as close to
the center of the motorcycle as possible to protect it from water.
Connect the black cable of the MD-4 device to the accessory
wiring directly to the black 4PIN with a three-wire plug that the
main unit wiring has.
NOTE: The unit is not protected from water, it is recommended to
protect it with a bag aſter setup.
26
To Next Page
Loading...