1
2
3
Turn the switch ignition to the ON position.
The siren will be activated.
The siren will stop sounding from previous triggered
state and will start emitting soſt siren tones.
At the 5th fiſth soſt siren sound
turn the switch ignition OFF.
Save the set state, and exit from setting menu.
LCD transmitter will respond with 1 sound and will
get back to standby and time display.
2.23 Security disarming without remote control
(factory default)
Use this feature in any case the remotes are lost
or aren't correctly functioning.
The siren will stop sounding from activation mode (ignition ON)
and will start making soſt siren sounds.
If the procedure is followed correctly, the system will be disarmed
with (2) two siren chirps.
Within 15sec, turn ignition switch ON/OF (5) five times and stay
in the ON position.
2.24 Security disarmament with Personal PIN code
While the system is in a state of disarmed.
·Password setup and changing
15
To Next Page
Loading...