2.26 Programming menu-output GPS (positive factory setting)
Turn INGITION to ON-OFF-ON position. Press and release Νο 4
button on the LCD remote, will respond with three chirps, you are
in the programming menu:
Output positive: Press No1 button. The LCD transmitter will
respond with chirp once.
Output negative: Press No2 button. The LCD transmitter will
respond with chirp twice.
Aſter your choice, turn INGITION to OFF position. The LCD
transmitter will respond three "Bi Bi Bi" to save it.
Long press LCD remote button 3.
2.27 LCD Transmitter (alarm notifications)
You can adjust the notifications with sound or sound and vibration
Factory default notification by sound (duration of 30sec)
System armed or disarmed
The LCD will respond with two BIBI sound and vibration twice,
selection with sound and vibration.
Long press again LCD remote button 3. The LCD will respond
with two BIBI sound and vibration twice, selection with sound
and vibration.
Important: to extend the battery life of the LCD remote, use sound
and vibration in case of emergency.
17
To Next Page
Loading...