ELSER 800V1 - Remotes Registering to the System Memory

2.25 Remotes registering to the system Memory
Encoding remote transmitters in system memory
Remote registering is performed in disarmed
mode in the following order:
Unplug the power fuse from the system and plug again, the
system will emit (2) two siren chirps and direction lights flasher.
1
2
3
Turn OFF IGNITION.
Turn switch IGNITION ON/OFF (3) times
and stay in ON position.
Within 6sec press and
hold down the button 1.
The system will emit (2) two siren chirps and parking light will flash once.
The system will emit (2) two siren chirps.
To exit the remote control coding menu
Repeat step 2 to register the second remote control the
system will emit additional (2) two siren chirps.
1 siren sound and 1light flashes will follow
While new remotes registration it is necessary reregister old ones,
otherwise they will be deleted.
Warning! Total 2 remotes can be registered to the system memory.
16