ELSER 800V1 - How to Activate the Built-In Battery

By disconnecting the battery cables from the motorcycle, the alarm
system with the built-in battery automatically activates the siren sound.
The LCD remote control will automatically respond with continuous
beeps and the word POWER LOSS will appear on the LCD screen, to
indicate that the motorcycle has been attacked by an unauthorized person
by cutting the battery or alarm module wires.
CAUTION: Check the condition of the motorcycle.
2.38 How to activate the built-in battery
The parking light flash twice and the system siren sounds twice,
confirming that the system has activated the backup battery.
Step 2: repeat the same process, the parking light flash once and the
system siren sounds once confirming that the system has disabled the
backup battery.
Attention:
1. The siren sounds twice and parking lights flash twice
(built-in battery is activated).
2. The siren sounds once and parking lights flash once
(built-in battery is deactivated).
for 1sec together.
Ignition switch ON. Press and hold
remote button 1 and button 3
2.39 Important: user information
About the built-in battery
In case where the motorcycle will be parked for several
months without moving, to maintain the built-in battery
charged and in good condition.
Turn off the backup battery.
23