Elstat ems75 Sub-Zero - How to Perform a Half Reset (Hr)

Step Action Display
5 Press the Down button twice (x 2)
6 Press the Defrost button twice (x 2)
7 The EMS display shows:
You have successfully entered the EMS menu.
4.11 How to perform a half reset (Hr)
Perform a half reset to clear the self-learning matrix if the EMS controller has been unable to detect
activity correctly, for example, the view of the motion sensor was blocked, or if the cooler has been
moved to a new location.
Step Action Display
1 Press and holdthe Set button.
2 The EMS displays shows:
3 Enter the button sequence of the menu entry password:
4 Press the Set button four times (x 4)
5 Press the Up button once (x 1)
29 of 86
27 February 2014