Elstat ems75 Sub-Zero User Manual

However, to compensate for differences between the air temperature and the product temperature,
calibration 1 (CA1) can add an offset to the temperature measured on the appliance sensor.
l See "Calibration 1 (CA1)" on page 68
EMS controllers can be set to use Celsius (°C) or Fahrenheit (°F) - set by the Celsius or Fahrenheit (CF)
parameter.
l See "Celsius or Fahrenheit (CF)" on page 67
36 of 86
27 February 2014

Elstat ems75 Sub-Zero Specifications

General

Brand	Elstat
Model	ems75 Sub-Zero
Category	Controller
Language	English