Elster A100C - Options; 6 General Description; Basic Meter Types; Current Ratings

6 A100C - BS Single Phase Electronic Meter
_____________________________________________________________________________
5.2 Options
• One or two rates controlled by an external device
• IrDA or IEC 62056 – 21 communications
• Power flow insensitive mode (import plus export)
• Auxiliary terminals configured for:
- SO output (IEC 62053-31)
- Serial data output (IrDA communications only)
• Standard or extended terminal cover
6 GENERAL DESCRIPTION
6.1 Basic Meter Types
SJ… BS Case
6.2 Current Ratings
The A100C can be supplied for use with 120V or 230V single phase two wire systems at 50
or 60Hz. The following current ratings and pulses/kWh are available:
OFGEM Approved
A100C Current Voltage Frequency
SJ1LA..
SJ1MA..
SJ1NA..
20 - 100A
10 - 100A
5 - 100A
220 - 250V
220 - 250V
220 - 250V
50Hz
50Hz
50Hz
Other Variants
SJ1LA..
SJ1MA..
SJ1NA..
SJ1LC..
SJ1MC..
SJ1NC..
20 - 100A
10 - 100A
5 - 100A
20 - 100A
10 - 100A
5 - 100A
220 - 250V
220 - 250V
220 - 250V
110 - 127V
110 - 127V
110 - 127V
60Hz
60Hz
60Hz
50 or 60Hz
50 or 60Hz
50 or 60Hz
Other current ratings are available. Contact Elster Metering Systems.
See Figure 1 for full model code details.
© Elster Metering Limited - M130 300 2C - 5.2007