1 Introduction
6 User’s Guide Flatpack2 Rectifier Modules, 350002.013, 7v0-2010-09
Flatpack2 PS System ~ Industrial
The example in Figure 3 represents a typical Flatpack2 PS system for DC power supply of
industrial equipment, in all areas of the industry, power generation and distribution.
The system is fed from an external AC mains supply, and consists of rectifiers in power
shelves, a system controller and DC distribution unit. Battery banks, LVD contactors, etc.
are typically also a part of the system.
The system controller monitors the whole system, and serves as the local user interface.
You can configure the system from computer, installing the MMT application.
Figure 3 Typical Flatpack2 PS system for DC power supply of industrial equipment
To Next Page
Loading...
Need help?
General
