57
upgrades and replacements
4. To insert a new battery pack, hold the battery label side down and at an
angle, as shown.
Slide the connector end of the battery into position and then press down on
the other end of the battery until it clicks into place.
5. Reconnect your cables.
The battery pack is keyed so that it can be inserted in only
one direction. If the battery does not slide in easily, verify
that the connector end of the battery lines up with the
connector in the battery compartment.
AACR53700001K4.book Page 57 Friday, September 5, 2003 1:52 PM
To Next Page
Loading...
