eMachines E627 User Manual (English)

Questions and Answers:

D
Diana RojasAug 14, 2025
What to do if my eMachines E627 Laptop won't turn on?
- E
  elizabeth47Aug 14, 2025
  If your eMachines Laptop isn't powering on, ensure the power cable is securely connected to both the laptop and the electrical outlet. Try removing any extension cables or surge protectors and plug the laptop directly into a known good outlet. Also, disconnect the power and check that the Thermal Unit and fan airways are free of obstructions. Remove any external and non-essential hardware. Finally, remove any recently installed software.
J
jeffrey77Aug 17, 2025
How to fix no display issue on eMachines E627 Laptop?
- T
  Troy SmithAug 17, 2025
  If your eMachines Laptop screen is blank, first, ensure the internal display is selected and that the laptop has power (check for fan startup or lit status LEDs). Then, drain any stored power by disconnecting the power cable and battery, and holding the power button for 10 seconds. Connect an external monitor to check the display output. Disconnect all external devices, including docking stations. Reseat the memory modules and remove the drives.
D
David RivasAug 20, 2025
Why is my eMachines E627 video display abnormal?
- K
  Kristina TravisAug 20, 2025
  If your eMachines Laptop is showing an abnormal video display, first, try rebooting the computer. If there are permanent lines or dark spots, the LCD may be faulty. Adjust the brightness to the highest level and check that the display resolution is correctly configured. If you recently updated the video driver, roll it back to the previous version, or remove and reinstall the video driver. Check the Device Manager to confirm the device is properly installed.
E
enewtonAug 25, 2025
What causes random loss of BIOS settings on eMachines Laptop?
- D
  David WadeAug 25, 2025
  If your eMachines Laptop is losing BIOS settings, and it's more than a year old, replace the CMOS battery. Run a complete virus scan to ensure the computer is virus-free. If you're losing HDD or ODD BIOS information, disconnect and reconnect the power and data cables to these devices. If HDD information is missing, the drive may be defective and should be replaced. As a last resort, replace the motherboard.
F
fbrownAug 27, 2025
What to do if my eMachines Laptop HDD is not operating correctly?
- K
  Kendra GomezAug 27, 2025
  If the HDD in your eMachines Laptop isn't working right, start by disconnecting all external devices. Run a full virus scan with updated software. Try the Windows Vista Startup Repair Utility. Restart the computer and press F2 to enter the BIOS Utility. Make sure all cables and jumpers on the HDD and ODD are correctly set. Remove any recently added hardware and software. Run the Windows Disk Defragmenter and Windows Check Disk (chkdsk /r). Finally, restore system settings from a previous date using System Restore.
Z
Zachary JonesAug 30, 2025
How to solve sound problems on eMachines E627?
- K
  Kevin MilesAug 30, 2025
  If you're experiencing sound problems with your eMachines Laptop, try rebooting the computer. If you recently updated the audio driver, roll it back. Remove and reinstall the audio driver. Make sure all volume controls are set to mid-range. Remove any recently installed hardware or software. You can also restore system settings using System Restore.
J
Juan JenningsSep 3, 2025
What to do if my eMachines E627 Laptop microphone isn't working?
- J
  Julie MccarthySep 3, 2025
  If your eMachines Laptop microphone isn't working, first check that the microphone is enabled. Right-click on the Recording tab and select 'Show Disabled Devices.' Then, right-click on the microphone and select 'Enable.' Select the microphone, click 'Properties,' increase the volume to the maximum, and click 'OK.' Finally, test the microphone hardware.
K
kaustinSep 6, 2025
Why is my external mouse failing on eMachines Laptop?
- L
  Lisa BrownSep 6, 2025
  If your external mouse is failing on your eMachines Laptop, try using an alternative mouse. If it's wireless, replace the batteries and ensure a stable connection. For USB mice, try a different USB port. Restart the computer. Remove any recently added hardware and software, and check the Event Viewer for errors.
R
Ronald MartinezSep 10, 2025
What to do if eMachines E627 Laptop ODD fails?
- A
  aguerraSep 10, 2025
  If your eMachines Laptop ODD (Optical Disc Drive) is failing, reboot the computer and retry the operation. Try using a different disc. Check that the ODD device is displayed in the 'Devices with Removable Storage' panel.

eMachines E627 Specifications

General

Operating System	Windows 7 Home Premium
RAM	2 GB DDR2
Storage	160 GB HDD
Display	15.6 inch, 1366 x 768 pixels
Battery	6-cell Lithium Ion
Weight	2.7 kg
Optical Drive	DVD±RW
Networking	Wi-Fi 802.11b/g, Ethernet LAN
Dimensions	37 cm x 24.7 cm x 3.3 cm