To
during grass cutting operations.
Used
NOTE When moving from one area
to another, put the lever in a position
between «tortoise» and «hare».
Press the
Press the pedal all
When you
.
acts as a clutch, engaging and
Do not keep the pedal
half way between clutch engagement or
disengagement, as this can cause overheating
and damage the transmission belt.
NOTE When the machine is in
movement, keep your foot o the pedal.
Reverse must only
be engaged when the
machine has stopped.
according to the indications on the label.
.
.
To avoid damaging the
transmission unit, this operation must be
carried out only when the engine has stopped
with the pedal (g. 10.J) at neutral position.
To Next Page
Loading...
