4. Build a list of videos to convert:
a. Click the green icon next to the Input File field.
b. Navigate to your media folder(s).
c. Select one or more videos to convert.
Note: The program will not convert from any video format.
d. Once a video is selected, it will be added to a file list at the bottom of
the window. Repeat the Add File process until you have completed the
list of videos you want to convert.
5. Click the Begin button ( ) to start converting the list of videos. A
message will appear indicating when the conversion process is finished.
Important: If the video conversion fails, download the free codec from this link:
http://www.free-codecs.com/download_soft.php?d=5884&s=775
Save the file and then follow the installation instructions. After installation is
completed, open the E-matic Video Converter and try again.
3.3 Using Other Conversion Software
While the included software converts numerous formats to the format required by
the player, there may be some it cannot convert. Regardless of what conversion
software you use, be sure to convert your video media to a supported format at a
320x240 resolution. (See “Technical Specifications” in this manual for a list of
supported formats.)
3.4 Converting Video in Linux
Xvid video encoder
While the player does not come with
conversion software for Linux, there
are several free, open source
programs available in Linux that can
do the necessary transcoding. The
three most powerful command line
encoders are mencoder, ffmpeg. and
transcode. To make things easier,
you can use one of the many
available front-ends, although the
simplest may be avidemux (pictured).
Filter: reduce to 320x240
MP3 audio encoder
Filter: Mix audio down to stereo
AVI file container
E5 Series User Manual Page 6 of 35
To Next Page
Loading...
Need help?
General
