USING THE EMDR KIT
5.1 GENERAL USAGE INFORMATION
All parts of the EMDR Kit can be used simultaneously or separately.
To start a session, press on Start. All functions that are connected and
turned ON will start working. The time of the set as well as the pass count
are indicated in the main menu. Use the +/- buttons to adjust the speed of
the stimuli.
A gray icon indicates that this part
is currently not connected.
A green icon indicates that this part
is currently connected and activated.
A orange icon indicates that this part
is currently connected, but not activated.
Click on the icon of the Light Tube, Pulsators or Headphone to enter the
corresponding part’s submenu and adjust its settings.
Connect menu
Set counter / Session timer
Light Tube
(Click to open submenu)
Pulsators
(Click to open submenu)
Headphone
(Click to open submenu)
Speed of the stimuli
(Adjust with the +/- buttons)
Start / Stop button
10
To Next Page
Loading...
