5.2 USING THE LIGHT TUBE
Click on the Light Tube icon in the main menu to open the Light Tube’s submenu.
All of the settings for the Light Tube can be adjusted in this menu.
5.3 USING THE PULSATORS
Click on the Pulsator icon in the main menu to open the Pulsator sub-menu. In
this menu, you can switch the Pulsators on and o and adjust their intensity.
Furthermore, you can set the speed of the Pulsators independently from the
Light tube with the ‘Pulsators in sync’ option and you can let the LED lights
blink with the selected rhythm.
Light Tube on or o
Light Tube brightness
(Adjust with the +/- buttons)
Light Tube mode
Light Tube color
Pulsators on or o
Pulsator intensity
(Adjust with the +/- buttons)
Pulsators in or out of sync with
the Light Tube
Light stimuli on the Pulsators
11
To Next Page
Loading...
