EMDR Kit WIRELESS - Practical Information; Charging

PRACTICAL INFORMATION
6.1 CHARGING
Before using the EMDR Kit for the rst time, please charge the Light tube and
Pulsators with the provided chargers. The Light Tube can be charged by attaching
the charger to the side of the Light Tube.
The Pulsators can be charged by rmly pressing them into the dockingstation.
The Light Tube can be used while it is being charged.
PLEASE NOTE: When the Pulsators’ batteries are empty, they must be
re-charged before further use. So always ensure that these are charged before
use. The Headphone can be charged with the included mini-USB charger.
Increase the battery life by not charging them longer than 12 hours.
LED COLOR
INDICATORS
Blue &
blinking
Blue
stable
Green
stable
Red &
blinking
Red
stable
Pulsators Ready to
connect
Connected Battery
charging
complete
Battery
is
charging
Battery
is almost
empty
Headphone Connected - - Ready to
connect
Battery is
charging
Light tube
(on/o button
on its side)
Ready to
connect
Connected - - -
Charging LED
(On the left
side of the
Light Tube)
- -
Battery is
charged
Battery is
charging
-
13