EmerCom Technologies EMC-60 - Page 12

EMC-60 User Guide
- 12 -
Cmd Command Range Default
11 Primary Ring
Transfer Count
3 – 10 rings 5
12 Secondary Ring
Transfer Count
3 – 10 rings 5
13 Third Ring
Transfer Count
3 – 10 rings 5
14 Auto Answer 0 = OFF
1 = ON with cab ring tone
2 = ON with no Cab ring tone
1
15 Talk Time 3 – 10 minutes 5
16 Operator Wait
Time
20 – 200 seconds 45
17 Operator Prompt 0 = OFF
1 = ON
1
18 Button 2 Special order only
19 Remote Call
Number
0 - 23 digits; values 1,2,3,4,5,6,7,8,9,0,#(pause)
Blank = no remote call
Blank
20 Remote Call
Dialing
Frequency
0 = OFF
1 = Once (10sec delay after exiting PROG)
2 = Daily, with descriptive prompt
0
23 SoundNet Code Blank or 11 digits; values 1,2,3,4,5,6,7,8,9,0 Blank
24 Start PLM Test 0 – 100 seconds (resets to 0 after test) N/A
30 Volume Setting 0 = Soft
9 = Loud
5
31 Microphone
Setting
0 = Least sensitive
9 = Most sensitive
5
32 Push & Hold 0 = OFF – instant single press
1 = ON – hold call button for >= 1sec or 3 times
in a 5sec window
0
33 Service Prompt /
Notification
0 = OFF
1 = ON - played every 5min if call not answered
1