Need help?Do you have a question about the EmerCom Technologies EMCS-OEM and is the answer not in the manual?
General| Category | Emergency Phone |
|---|---|
| Manufacturer | EmerCom Technologies |
| Model | EMCS-OEM |
| Operating Voltage | 12-24 VDC |
| Ingress Protection Rating | IP66 |
| Power Supply | DC |
Details on connecting the system's wiring components, including phone lines and power.
Instructions for activating the system from sleep mode or remotely.
Procedure to test phone line operability using the keypad and dial tone.
Guides on automatic system configuration and validation of wired communications.
Steps to enter and use the keypad for system programming and parameter changes.
How to set up Phone Line Monitoring (PLM) groups for alarm relay assignments.
Details the primary capabilities and benefits of the EMCS Consolidator, including safety code compliance.
Explains automatic system validation and configuration processes.
Describes continuous monitoring of system status and alarm conditions.
Verifies operability of end-to-end communication links, required by code.
Procedure for on-site personnel to test phone line functionality.
How to take over existing off-site conversations.
How to broadcast messages to all elevator phones.
How remote phones can call the Consolidator.
Using internal phones for off-site calls, noting non-emergency priority.
How the system signals video management during calls.
A summary table of programming commands and their ranges.
Detailed explanations of each programming command and its usage.
Essential safety guidelines for using the telephone equipment to prevent hazards.
Physical dimensions of the EMCS and EMCS-MR units.
Description of each key and its function on the keypad.
Explanation of the touchpad icons and PCB-mounted LEDs.
To Next Page
