EmerCom Technologies EMCS-OEM - Programming; Summary Table; Programming Details

EMCS User Guide
- 13 -
6. Programming
6.1 Summary Table
The following section 6.2 provides more detailed information on each command.
Cmd # Command Range Default
1 Learn Mode
- prompted to select
Operating Mode
0 = Lobby Mode (automatic if no phone
lines are available)
1 = TEL Mode (if 1 or 2 phone lines)
2 = Intelli-Split (if 1 or 2 phone lines)
N/A
2 Operating Mode 0 = Lobby Mode
1 = TEL Mode
2 = Intelli-Split Mode
1
3 Phone Lines Available 1 digit; values 0,1,2 1
4 Active Stations 0 – 6 (or 1-12 with EMCS-EXP) 1,2
5 Inactive Stations 0 – 6 (or 1-12 with EMCS-EXP) 3,4,5,6
6 Serial Number Playback Replay only Pre-set
7 Main Firmware Version Replay only Pre-set
8 Alarm Status Playback Replay only, one or more of the following
“NO MAINS POWER”
“NO BATTERY”
“LOW BATTERY”
“CHARGING BATTERY”
“NORMAL”
“PHONE LINE FAULT”
“STATION NUMBER #n FAULT”
N/A
9 Access Code 5 digits; values 1,2,3,4,5,6,7,8,9,0 12345
10 Language 0 = English
1 = French
0
14 Auto Answer 0 = OFF (ignore incoming on phone line)
1 = ON
1