EmerCom Technologies EMCS-OEM - Command # 30: HANDSET VOLUME SETTING (Not EMCS-MR); Command # 31: HANDSET MIC. SENSITIVITY (Not EMCS-MR); Command # 32 & # 33: PHONE LINE #1; #2 BOOST; Command # 34: REMOTE PHONE ATTENUATION

EMCS User Guide
- 19 -
6.2.16
Command # 30: HANDSET VOLUME SETTING (not EMCS-MR)
The “Volume Setting” command sets the volume of the Consolidator handset speaker.
Voice Prompt: “Volume”
6.2.17
Command # 31: HANDSET MIC. SENSITIVITY (not EMCS-MR)
This sets the Consolidator handset microphone sensitivity. 0 = least sensitive; 9 = most
sensitive.
Voice Prompt: “BEEP”
6.2.18
Command # 32 & # 33: PHONE LINE #1 / #2 BOOST
“Phone Line Boost” will amplify the signal for soft/quiet phone lines.
Contact Customer Care (1-844-363-7266) for additional information.
Voice Prompt: “BEEP”
6.2.19
Command # 34: REMOTE PHONE ATTENUATION
For communication from “noisy” Machine Rooms, “Remote Phone Microphone
Attenuation” reduces the handset microphone path volume to the elevator phone to
reduce “chopping” and improve 2-way communication.
Voice Prompt: “BEEP”
6.2.20
Command # 43: FACTORY RESET
All parameters are reset to factory default. Enter <1> to confirm.
Voice Prompt: “Factory parameters reset”
6.2.21
Command # 44: REMOTE SILENCE BUZZER
“Remote Silence Buzzer” will remotely mute the Consolidator buzzer and the CID
alarms. (or silence the buzzer with the “silence” button on the consolidator)
Voice Prompt: “Silence buzzer”