EasyManua.ls Logo

EmerCom Technologies EMCS-OEM - About the EMCS Emergency Consolidator; Key Features

EmerCom Technologies EMCS-OEM
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EMCS User Guide
- 7 -
1. About the EMCS Emergency Consolidator
1.1 Key Features
ASME A17.1/CSA B44 Safety Code for Elevators requires the means to call into
any elevator from within a tall building with elevator travel greater than 60’ (18m).
The EMCS Consolidator manages this operation through its handset and any
connected remote handsets, overriding off-site calls in progress.
Intuitive visual and audible indications for system operation and call routing
- Colour-coded touch-control icons indicate each elevator phone status
- Voice prompts announce current system status to any handset away from
the main display, either on-site or off-site, with on-site CID display
System-wide page (ALL CALL) from on- or off-site to all elevators
2 concurrent calls to reduce wait time in a broad emergency
Ease of setup and operation
- "Learn" mode to automatically configure the system
- Programmable Phone Line Monitoring (PLM) group configuration
- “Line Test” mode to assess the building phone line
- Remote phones can call off-site
- Bilingual voice prompts
- Touch keypad (French overlay available)
Advanced diagnostics
- Built-in Phone Line Monitoring (PLM) from each elevator to the EMCS and
for each connected TEL line as required by Code
- Watchdogs with counters for automatic fault recovery and reporting
- Remotely simulate alarm call
3 PLM group alarm relays for every 6 cabs (fail safe - closed when no alarm)
Built-in Video Trigger relay per elevator (normally open) plus all-clear signal
“Call Anywhere” (see Call Routes Available on page 2)
Call off-site, via an available phone line, using any on-site phone
Simple SD card firmware upgrades enable feature flexibility with optional
customization
Digital chip platform
Self-diagnostics continuously monitor its own operation and its environment
Compatible with a wide range of power supply voltages (AC and DC)
Vandal-resistant #16-AWG Brushed Stainless Steel
Box width 14.25" to fit (recess) between wall studs
Status and alarm messages displayed on Remote Phone CID

Table of Contents

Related product manuals