B.3.2 Paired Gateways
Once the Gateways have finished the pairing process, Gateway A will appear as the current
active Gateway on the left hand side and Gateway B will be the standby Gateway on the
right. If significant configuration changes need to be downloaded to the standby Gateway,
it may temporarily go offline shortly after the pair process is complete. This is expected
behavior and does not represent instability in the system.
Figure B-2: Redundant Pair
Reference Manual Redundant Gateway systems
00809-0600-4410 May 2020
Emerson 1410S/781S 57
To Next Page
Loading...
