Figure 2-2: User Privileges
2.3.7 Change passwords
It is a secure practice to change the user account passwords from the default ones. This
should be done on both the WirelessHART and ISA10 networks. To change the User
Account passwords, follow the steps below.
Procedure
1.
Navigate to System Settings → Users → User Accounts.
2. Click the Edit button of the user password to be changed.
3. Set the new password for the role based account, and confirm.
4. Select Save Changes.
Note
It is suggested the default security settings in System Settings → Users → User
Options be changed to the local IT best practices or the “Normal” setting after
initial login. Strong or custom settings are available for more robust passwords.
Configuration Reference Manual
May 2020 00809-0600-4410
16 Emerson.com
To Next Page
Loading...
