www.fieldcommunicator.com
USER’S MANUAL
February 2009
375 FIELD COMMUNICATOR
APPENDIX BPRODUCT CERTIFICATIONS
OVERVIEW All 375 Field Communicators come with the main unit
label (see Figure B-1). Intrinsically Safe (IS)
(KL option) 375 Field Communicators also have an
additional label opposite the main unit label. If the 375
Field Communicator does not contain this label (NA
option), then it is considered non-IS approved.
APPROVED
MANUFACTURING
LOCATIONS
Emerson Process Management —
Leicester, England
EUROPEAN
DIRECTIVE
INFORMATION
CE Compliance
Electro Magnetic Compatibility
(2004/108/EC)
Tested to specifications EN 61000-6-3,
EN 61000-6-2, and EN 61326-1
ATEX Directive (94/9/EC) (KL option only)
Emerson Process Management complies with the
ATEX Directive.
Specific ATEX Directive Information is located within
this section and in the 375 Field Communicator
Getting Started Guide. See “Power Supply/ Charger
Certification” on page B-4 for more information.
Applicable standards EN 60079-0, EN 60079-11, and
EN 60079-26.
To Next Page
Loading...
