Emerson 375 - Hazardous Locations Certifications (KL Option Only); International Certifications; North American Certifications

Product Certifications
B-2
Other important guidelines
Only use new, original parts.
Do not charge the battery in hazardous areas.
Have repairs done only by qualified personnel.
Only charge or power using the 375 power
supply/charger.
HAZARDOUS
LOCATIONS
CERTIFICATIONS
(KL OPTION
ONLY)
International
Certifications
IECEx
Certification No.: IECEx BVS 08.0044
Ex ia IIC T4 (-10°C ≤ Ta ≤ +50°C)
North
American
Certifications
Factory Mutual (FM)
Intrinsically Safe for Class I, Division 1, Groups A, B, C,
and D and Class I, Zone 0, AEx ia IIC T4
(Ta = 50°C) hazardous locations when connected as
indicated in the control drawing 00375-1130. See the
control drawing for input and output parameters.
Canadian Standards Association (CSA)
Intrinsically safe for use in Class 1, Zone 0, Ex ia IIC T4
(Ta = 50°C) hazardous locations when connected as
indicated in the control drawing 00375-1130. See the
control drawing for input and output parameters. Please
note the parameters in the control drawing are the same
as the FM parameters.