HART Functionality
3-22
RUNNING
HART
DIAGNOSTICS
DC Voltage
Measurement
(HART
Terminals)
The HART DC voltage measurement takes a voltage
reading at the HART connector and displays it on the
screen.
To check the device voltage:
1. From the HART Application main menu, double-tap
HART Diagnostics.
2. Double-tap DC Voltage Measurement. The DC
voltage measurement is displayed. Tap OK when
done viewing the measurement. To refresh the
screen, double-tap DC Voltage Measurement from
the HART Diagnostics menu. Voltage measurements
are for reference purposes only.
DISCONNECTING
FROM A HART
DEVICE
Prior to disconnecting the 375 Field Communicator from
a HART device, be sure to check the following items:
• Determine if you want to save a configuration.
• Verify methods are complete.
• Resolve any un-sent data to the device.
To Next Page
Loading...
