Fieldbus Functionality
4-22
Viewing
Available
Device
Descriptions
The Available Device Descriptions List menu lets you
view all the device descriptions in the 375 Field
Communicator. Fieldbus device descriptions enable the
375 Field Communicator to recognize and configure
fieldbus devices.
To view the fieldbus device descriptions installed on the
375 Field Communicator:
1. On the Fieldbus Application main menu, double-tap
Utility.
2. Double-tap Available Device Description List. The
manufacturer names of the installed device
descriptions are listed.
3. Double-tap the desired device manufacturer to
expand the list. The models available for the
manufacturer are listed.
4. Double-tap the desired device model. The device
revisions available for the selected model are listed.
One of the following icons will appear next to each
device description to indicate its status:
- A tested device description can be used with the
system software version in the 375 Field Communicator.
- An untested device description has not been
formally tested for use with the system software version
in the 375 Field Communicator. The device description
can be used, but you may experience unexpected
results.
- An incompatible device description cannot be used
with the system software version in the 375 Field
Communicator.
To Next Page
Loading...
