Learning the Basics
2-6
Figure 2-1. NiMH Adapter Cable used to charge the NiMH Battery Pack
NOTE
Do not charge the battery in hazardous areas.
To charge the battery:
1. Plug the power supply/charger into a power outlet.
2. Ensure the connectors match before connecting the
power supply/charger to the battery.
3. Plug the power supply/charger connector into the
battery. The battery is fully charged when the light on
the power supply/charger is green.
NiMH Adapter Cable
Lights
Power supply/charger
Green
connector on
the power
supply/charger
To Next Page
Loading...
