36 100-214-251 REV. 05
3.3 Unpacking
The Integrated Welder is fully assembled. It is shipped in a sturdy cardboard box. Some
additional items are shipped in the box with the Integrated Welder.
Table 3.3 When unpacking the Integrated Welder, take the following steps
Step Action
1 Unpack the Integrated Welder as soon as it arrives. Save the packing material.
2 Inspect the controls, indicators, and surface for signs of damage.
3
Remove the cover of the Integrated Welder (
Table 7.2 Replacement Parts) to
check if any components became loose during shipping.
NOTICE
If damage has occurred, notify the shipping company immediately. Retain packing
materials for inspection.
100-214-251 IWoper.book Page 36 Friday, June 16, 2017 4:12 PM
To Next Page
Loading...