Emerson Branson 2000 Series - Take Inventory of Small Parts; Table 4.1 Small Parts Included (=X) with IW;IW+ Integrated Welder; Table 4.2 List of Cables

44 100-214-251 REV. 05
4.3 Take Inventory of Small Parts
4.3.1 Cables
For status/alarm interfacing with the 2000IW+ CE Welder, you may also need a J971
alarm cable. See Table 4.2 List of Cables for available lengths.
Table 4.1 Small Parts Included (=x) with IW/IW+ integrated Welder
Part or Kit 20kHz Stand (Base) Stand (Hub)
T-Handle Wrench x x
Mylar Washer Kit x
20kHz Spanners (2) x
Fixture Bolts and Washer x
M8 Allen Wrench x x
Table 4.2 List of Cables
P/N Length
For Start/Stop control in
automated machines
101-240-020 Start Cable (J911) 8’ (req PLA)
101-240-015 Start Cable (J911) 15’ (req PLA)
101-240-010 Start Cable (J911) 25’ (req PLA)
For Status/Alarm interfacing to
automated machines
101-240-021 Alarm Cable J971, 8 ft.
101-240-016 Alarm Cable J971, 15 ft.
101-240-011 Alarm Cable J971, 25 ft.
100-214-251 IWoper.book Page 44 Friday, June 16, 2017 4:12 PM